Siemens 1FT6 03 Série Mode D'emploi page 71

3ls
Designation of the documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status code in the "Remarks" column:
A . . . . . New documentation
B . . . . . Unrevised reprint with new Order No.
C . . . . . Revised edition with new status
Edition Order No. for 1FT6
02.04 6SN1197–0AD02–0BP0
This Manual is part of the documentation on CD–ROM (DOCONCD)
Edition Order No.
03.04 6FC5 298–7CA00–0BG0
Trademarks
SIMATICr, SIMATIC HMIr, SIMATIC NETr, SIROTECr, SINUMERIKr, SIMODRIVEr, SIMOVERT
MASTERDRIVESr and MOTION–CONNECTr are registered trademarks of Siemens AG. Other names in
this publication might be trademarks whose use by a third party for his own purposes may violate the rights
of the registered holder.
For further information please visit us at:
http://www.ad.siemens.de/mc
This publication was produced with Interleaf V 7
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority. Offenders
will be liable for damages. All rights, including rights created by patent
grant or registration of a utility model or design, are reserved.

Siemens AG 2004. All rights reserved.
Order No.6SN1197–0AD02–0BP0
Printed in the Federal Republic of Germany
Remarks
A
Remarks
C
The controller may support functions that are not described in this
documentation. The customer is not, however, entitled to these
functions in the event of the system being replaced or serviced.
We have checked the contents of this document to ensure that they
coincide with the described hardware and software. Since deviations
cannot be precluded entirely, we cannot guarantee complete
conformance. However, the data in this manual are reviewed regularly
and any necessary changes included in subsequent editions. We
welcome suggestions for improvement.
We reserve the right to make technical changes.
Siemens–Aktiengesellschaft