Siemens 1FT6 03 Série Mode D'emploi page 81

Table 1-5 Technical data 1FT6, rated speed 2500 RPM
n M M
N 0 N
[RPM] [Nm] [Nm]
Force ventilation
2500 425 340
Water–cooling
2500 155 135
2500 200 185
2500 240 220
2500 300 275
2500 425 340
Cables are not included in the scope of supply of the motors and must be separately ordered.
1) With absolute value encoder (due to the max. encoder temperature)
2) Power connector and terminal box mutually exclude each other
3) Motor with terminal box, max. cross–section that can be connected, refer to Table 1-19
4) The shock hazard protection of the power cables depends on the size of the selected power module (refer to the
Planning Guide, Drive Converter)
5) Motor with terminal box, power and signal cable, refer to Catalog, Chapter "MOTION–CONNECT connection system"
6) 6FX8002 = MOTION–CONNECT 800;
6FX5002 = MOTION–CONNECT 500;
Technical data, refer to Catalog, Chapter "MOTION–CONNECT connection system"
7) Cables can be supplied in units of one meter;
Length code, refer to the Planning Guide "General Part for Synchronous Servomotors"
8) For the 1FT613V motors, the maximum current and rated current of the drive converter must be observed.
1FT616V motors can only be operated together with SIMOVERT MASTERDRIVES MC drive converters.
 Siemens AG 2004 All rights reserved
Synchronous Servomotors, 1FT6 (PFT6) – 02.04 Edition
1)
M Motor type
N
[Nm]
[A]
1FT6–
8)
306 163–8SD7V
8)
135 132–6WD7V
8)
185 134–6WD7V
8)
220 136–6WD7V
8)
275 138–6WD7V
8)
340 163–8WD7V
Number of poles
I I Cross–
Connec-
0 N
section
tor size
[A] [mm
)
2
226 185 –––
92 82 –––
122 115 –––
158 149 –––
167 162 –––
240 240 –––
Motor Description
1.5 Technical data
Cable type
3) 4) 5)
]
2 6)
6FXV002–
––– –––
––– –––
––– –––
––– –––
––– –––
––– –––
1FT6/1-23
Terminal
2)
box
gk630
gk630
gk630
gk630
gk630
gk630