Siemens 1FT6 03 Série Mode D'emploi page 73

Motor Description
1.1 Applications and features
Applications
The 1FT6 series was developed for applications on machine tools and production
machines with the highest requirements placed on the smooth running characteris-
tics and surface quality. In conjunction with the SIMODRIVE and SIMOVERT
MASTERDRIVES MC drive converter systems, these motors are, among other
things, admirably suited for feed and main drives on lathes and milling machines,
machining centers, for grinding and special–purpose machines and for
woodworking.
They can be directly mounted onto feed spindles and onto gearboxes with toothed
wheels or toothed belts.
Features
Depending on the shaft height, the 1FT6 series has stall torques of between 0.4
and 700 Nm and rated speeds from 1500 to 6000 RPM. A high overload capability
is available over the complete speed control range. The motors are optimized for a
low torque ripple.
Standards, regulations
The appropriate standards, regulations are directly assigned to the functional
requirements.
 Siemens AG 2004 All rights reserved
Synchronous Servomotors, 1FT6 (PFT6) – 02.04 Edition
1
1FT6/1-15