Data Reading And Programming; Reading And Programming Procedures; Counters - Astoria Plus4You Manuel D'utilisation

13
Data reading and
programming

13.1 Reading and programming procedures

To access the reading of machine data and the
programming of the main parameters, hold down
the ENTER key of the navigator key for at least 5
seconds.
The following messages will appear on the dis-
play:
1

COUNTERS

2 SERV.BOILER PRESS
E
nter
3 CUP HEATER TEMP.
4 CLOCK SETUP
To select the item concerned, use the ( ) and
( ) keys.
E 1 COUNTERS
nter
2 SERV.BOILER PRESS
3 CUP HEATER TEMP.
4 CLOCK SETUP
E
nter
To exit the menu, press the ( ) or ( ) key.
1.2 Bar
E
nter
08:30
Humidity 62%
E
nter
i
In case of inactivity of the operator, after 10 secon-
ds, the display will return to the main menu.
User manual
13.2 Counters
In this section it is possible to display the number
of selections made (total and individual).
Scroll the menu until the item is highlighted
"1 COUNTERS"
1 COUNTERS
2 SERV.BOILER PRESS
3 CUP HEATER TEMP.
4 CLOCK SETUP
Confirm the selection by pressing the ENTER key
and the display will show the following:
To display the partial strokes for the various types
of delivery, press the respective keys on the push-
button panel.
The selected key will light up, and the count of
selections made will appear on the display.
Press 0.0
10-MAY-2010
P 32%
TOTAL COFFEES
00000
COUNTERS
00000
E
nter
Total number of
selections made
on the machine.
P
rog
S
top
Number of coffee/
tea selections
made on the
machine.
45