8
Preliminary operations
8.1 Changing the water
In case of breaks longer than 1 week, it is neces-
sary to perform the changing of the 100% of the
water contained in the hydraulic circuits of the ma-
chine, by using the appropriate dispensing points,
as described in the Paragraph 3.4 "Activation".
8.2 Cup heater
Place the cups to be heated
on the appropriate surface (1).
To turn on the cup heater,
press the (
) navigator key;
an asterisk will appear on the
first line of the display to the far
right of the display, indicating
that the cup heater is ON.
To turn it off, press the ( )
navigator button again, the asterisk will disappear.
To change the temperature of the cup heater,
proceed as described in chapter 13.
!
For safety reasons, it is advisable not to place cloths
or other objects on the cup heater surface (1).
If the cup heater is set to a temperature lower than
i
70 °C in the adjustment menu, it will remain off,
even if switched to ON ( * symbol on the display).
User manual
8.3 Dispensing compart-
To turn the machine com-
partment light on and off, press
the ( ) browser key.
8.4 Cup raising grilles
Cup heater
When using cups of different heights, you can use
ON/OFF
the special concealed grilles (9) which the machine
is equipped with.
To use the pull-out grille, extract it from its seat by
E
nter
pulling it outwards until it is fully blocked in position.
When finished using the grille, push it towards
the machine until it disappears completely into its
seat.
1
ment light
9
E
nter
Light ON/OFF
39