Push-Button Panel For Coffee And Tea; Display And Browser Key; Autosteamer Push-Button Panel; Preparation - Astoria Plus4You Manuel D'utilisation

Masquer les pouces Voir aussi pour Plus4You:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 57
5.2 Push-button panel for coffee and tea selections
1 Medium
coffee
1 Long
1 Espresso
coffee
2 Medium
coffees
2 Espressos

5.3 Display and browser key

Ambient
humidity
Hour
Boiler
pressure
1.2 Bar
08:30
Humidity 62%
Absorbed
power bar
Browser key

5.3 Autosteamer push-button panel

Short
Long
autosteamer
autosteamer
dose
dose
User manual
Tea
P
rog
S
top
Stop /
Programming /
Continuous
2 Long
coffees
Instantaneous
power
absorbed
Date
Hydraulic
circuit
pressure
Press 0.0
10-MAY-2010
P 32%
E
nter
Automatic
Manual
heating
steam +
foaming
6

Preparation

6.1 Preparation of the machine

The preparation of the machine and the instal-
lation operations must be carried out by qualified
personnel only.
The installer must strictly follow the indications
provided in Chapter "Warnings for the Installer".
Using the machine without all the installation
!
operations having been carried out by technical
personnel could damage it seriously.
!
The machine must be placed in a perfectly hori-
zontal position.

6.2 Grinding and dosing coffee

Place the grinder-doser in a convenient place
near the machine.
Grinding and dosing of coffee must take place
in accordance with the instructions of the manu-
facturer of the grinder-doser.
To obtain good quality espresso coffee we sug-
gest the following:
not to store large amounts of coffee beans. to
observe (in any case) the expiry date indicated
by the producer.
to grind an amount of coffee based on use, pre-
pare the amount contained in the doser and if
possible use it before the end of the day;
never to buy (if possible) already ground coffee,
as it expires quickly. if necessary, to buy it in small
vacuum-sealed packages.
to fill the filter with a dose of ground coffee
(about 6-7 gr.) and press it with the special coffee
presser. Hook the filter holder to the delivery group.
To prevent the seal from wearing too soon, clean
!
the edge of the filter before engaging the filter
holder on the delivery group. Do not excessively
tighten the filter holder to the dispensing group.
37

Publicité

Table des Matières
loading

Table des Matières