Programming Doses; Programming Coffee Doses; Programming Hot Water Doses - Astoria Plus4You Manuel D'utilisation

Masquer les pouces Voir aussi pour Plus4You:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 57
9

Programming doses

9.1 Programming coffee doses

To program the dose keys, proceed as follows:
press and hold the "PROG/STOP" key down for
5 seconds: the "PROG/STOP" key will flash and
all keys on the push-button panel being pro-
grammed will turn on;
fill the filter with a dose of ground coffee and
press it with the coffee press;
attach the filter holder to the delivery group;
place the coffee cup under the delivery spout
(16);
press the desired
dose key (e.g.: "1 Es-
presso"
);
all the leds will turn
off, except for the
dose key being pro-
grammed;
wait for dispensing; to confirm the dose press the
dose key or the "PROG/STOP" key again;
repeat this operation for the other dose buttons;
upon completion of the programming, press the
"PROG/STOP" key to exit dose programming.
i
After 30 seconds of idle time, the machine will
automatically exit the dose programming mode.
Programming of each dose must be carried out
i
with ground coffee and not with previously used
grounds.
It is possible to program all machine's push-button
panels simultaneously using only the left push-
i
button panel. To obtain different doses for the
various groups, perform the programming with
the left push-button panel first, and then with all
the others.
40
16

9.2 Programming hot water doses

To programme the
hot water key, proceed
as follows:
place the cup under
the hot water nozzle
(12);
press and hold down
the "PROG/STOP"
key on the left push-
button panel until
all dose key LEDs are
switched on;
press the hot water delivery key
when the desired dose has been reached, confirm
by pressing the hot water key
upon completion of the programming, press the
"PROG/STOP" key.
The tea key is present on each keypad of each group.
i
These can be programmed individually and supply
doses which are independent from one another.
The 4GR version has 2 hot water nozzles. The 2
i
keypads on the left control the left hot water noz-
zle, while the 2 keypads on the right control the
right hot water nozzle.
12
;
again.
User manual

Publicité

Table des Matières
loading

Table des Matières