Energy Saving System - Astoria Plus4You Manuel D'utilisation

To change the temperature of the autosteamer,
i
and to enable or disable its operation, contact the
Technical Support Service.
To keep the steam dispensers in perfect working
order, it is advisable to carry out a brief dry di-
spensing after each use. Keep the tips of the auto-
!
steamer clean at all times using a cloth dampened
in lukewarm water. Handle the autosteamer with
utmost caution due to the hazard resulting from
the presence of high-temperature steam.
Do not leave the autosteamer nozzle immerged
in the milk when it is not being used. Handle the
!
autosteamer with utmost caution due to the hazard
resulting from the presence of high-temperature
steam.
44
12

Energy Saving System

The machine is provided with a software that
manages the automatic standby system during
breaks, the night Energy-saving feature and the
intelligent adjustment of the temperature.
This allows a considerable energy saving, during
night breaks, maintaining the machine in the condi-
tion to quickly return to operate.
Moreover, the software distributes the power
only where and when it is needed, thus allowing to
save energy during the normal working activity too.
If provided for in the programming, it automati-
cally puts into standby one or more groups when
the workload decreases and prepares them for full
capacity when needed.
All this is indicated in the following way:
ENERGY SAVING
+ flashing of the
"PROG/STOP" keys
Flashing "PROG/STOP" key
To bring a dispensing group back from standby,
press and hold the respective "PROG/STOP" button
for 3 seconds.
It will return to full operation in about 1-2 min-
utes.
If the machine is in the "ENERGY SAVING" mode,
also the services boiler will be reactivated, thus exit-
ing the "energy saving" mode.
The dispensing groups and the services boiler,
which have been reactivated, will remain opera-
tive until the next time limit set for the start-up of
the energy saving mode (for the machine) or of the
standby mode (for the dispensing groups) expires.
The system will continue to follow the pro-
grammed energy saving settings.
To change the operating parameters of the "ener-
i
gy saving" system, contact the Technical Support
Service.
All the groups are
in stand-by or the
entire machine (in-
cluding the services
boiler) is in energy
savings phase.
One or more delivery
groups (but not all of
them) are in standby.
User manual