Cleaning Operations; General Instructions; Cleaning The Filters And Filter Holders; Washing The Dispensing Group - Astoria Core200 AEP Mode D'emploi

Core200

7.5 Cleaning operations

General instructions

7.5.1
A few simple cleaning tasks are required to have a perfectly
sanitised and efficient appliance. The instructions provided
here apply when the machine is being used on a regular ba-
sis. If the machine is used consistently, cleaning should be
performed more frequently.
Do not use alkaline cleaners, solvents, alcohol or
aggressive substance-based products (e.g. phos-
phoric, citric or sulfamic acids). The products/
cleaners used must be suitable for this purpose and not cor-
rode the water circuit elements.
Do not use abrasive cleaners which may scratch the body's
surface.
Always use clean and sanitised cloths when cleaning.
When washing the filters, filter holders and all machine
components, use Manufacturer-supplied cleaners or prod-
ucts specific for cleaning professional coffee machines.
Cleaning
Body and Grilles:
Clean the panels of the body with a cloth dampened
in lukewarm water.
Remove the drip tray and cup holder grille and wash
with hot water.
Pushbutton panels:
Clean the pushbutton panels with a cloth dampened
in lukewarm water.
Turn off the machine before starting the cleaning
operation.
Filters and Filter Holders:
Wash the filters and filter holders on a daily and
weekly basis, as indicated in para. "7.5.2 Cleaning the
filters and filter holders" on page 44.
Perform the cleaning operations on a daily basis as
indicated in para. "7.5.2 Cleaning the filters and filter
holders" on page 44.
Steam nozzle :
Keep the nozzle clean at all times using a cloth damp-
ened in lukewarm water.
Check and clean the nozzle tips, by clearing the steam
outlet holes with a small needle.
Wash these on a weekly basis, as indicated in para.
"7.5.5 Cleaning the steam nozzle" on page 46:
Dispensing group:
Wash the dispensing group as described in para.
"7.5.3 Washing the dispensing group" on page 44
Internally clean the group on a weekly basis, as specified
in para. "7.5.4 Cleaning the group shower screen, shower
screen containment ring and filter holder" on page 45
Perform the cleaning operations on a daily basis as
indicated in para. "7.5.4 Cleaning the group shower
screen, shower screen containment ring and filter
holder" on page 45.
Grinder-dispenser and Hopper:
Clean the hopper and the dispenser inside and out
with a cloth dampened with warm water.
When finished, dry all parts thoroughly.
44 160
of
7.5.2
Caution: only immerse the filter holder cup in wa-
ter and try not to get the handle wet.
The cleaner must be diluted in cold water in the
doses indicated on the package (see the manufacturer).
Daily:
• Soak the filter and filter
holder in hot water over-
night so that the fatty cof-
fee deposits can dissolve.
• Rinse everything in cold
water.
Weekly:
• Use a screwdriver to detach the filter from the filter holder.
• Soak the filter and filter holder in warm water with a suit-
able cleaner for 10 minutes.
• Rinse everything in cold water.
7.5.3
X
Wash the dispensing groups on a daily basis as indicated be-
low:
• Remove the filter from the filter holder and fit a blind filter
(see spare parts).
X
• Pour the specific cleaner into the filter holder with the
blind filter and hook it to the dispensing group.
X X
AEP version
X X
• Carry out several dispensing cycles until the water comes
out clean.
• Remove the filter holder from the group and carry out at
least one dispensing cycle in order to eliminate any clean-
er residues.
• Repeat the same operations for the other groups.
• Remove the blind filter from the filter holder and replace
X X
it with the original one.
X

Cleaning the filters and filter holders

Washing the dispensing group

User manual