Connection Of The Power Supply - Biral PrimAXRED Série Instructions D'installation Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

5.2 Connection of the power supply

The pump must be protected on-site (10 A, slow) and must be connected to an external
mains switch. All cables used must have a heat resistance of up to 85 °C.
They must not be in contact with the pipe or the pump and motor casing.
All cables must be connected in accordance with EN 60204-1 and EN 50174-2: 2000.
The electrical connection must be made as indicated on the nameplate.
PrimAX
PrimAX xx-3
PrimAX xx-4
PrimAX xx-6
PrimAX xx-8
Example of a typical mains connection, 1x230V ±10%, 50 / 60Hz
L
N
Legende:
1 Sicherung (min.10A, träge)
2 Externer Schalter
Änd.Index
Protection
1
(10A, inert
FI
Datum
Visum
Ratet current [A]
0.03 – 0.12
0.03 – 0.15
0.03 – 0.27
0.03 – 0.41
external
2
switch
961807_01
english
Power P
[W]
1
2 – 15
3 – 18
3 – 34
3 – 50
97
|

Publicité

Table des Matières
loading

Table des Matières