Technical Data; Disposal - Biral PrimAXRED Série Instructions D'installation Et D'entretien

108 english
|

10. Technical data

Supply voltage
Motor protection
Type of protection
Winding category
Temperature category
Media temperature
Ambient temperature
Operating pressure
Inflow pressure
Noise
Electromagnetic compatibility
EEI-values

11. Disposal

This PrimAX circulation pump was developed with sustainability in mind. This also includes
waste prevention and recyclability of materials. This product as well as its parts must be
disposed of according to the local regulations.
1×230 V ±10%, 50/60 Hz, PE
External motor protection is not required
IP 44 (EN 60529)
Insulation category F
TF 110 (EN 60335-2-51)
+2°C to +110°C
The temperature of the medium must be higher than the ambient
temperature to prevent condensation water from forming in the terminal
box and the stator.
Ambient temperature
°C
0
15
30
35
40
If the medium temperature is below the ambient
temperature, the pump head and connector
must be set in the 6 o'clock position.
0°C to +40°C
Max. 10 bar, 102 m, 1 MPa
Media-
temperature
≤ +75 °C
+90 °C
+110 °C
Sound pressure level under 43 dB(A)
EMV guidelines (2004/108/EC)
Standards: EN55014-1:2006, EN55014-2:1997
PrimAX xx-3 = EEI ≤ 0.15
PrimAX xx-4 = EEI ≤ 0.16
PrimAX xx-6 = EEI ≤ 0.17
PrimAX xx-8 = EEI ≤ 0.18
Media temperature
Min. °C
2
15
30
35
40
Minimunm inflow pressure
[bar] [m]
0.05 0.5
0.28 2.8
1.08 10.8
Max. °C
110
110
110
90
70
[MPa]
0.005
0.028
0.108