Operation; Switching On The Hob And Setting The Power; Switching Off The Hob - Pelgrim IDK764 Notice D'utilisation

OPERATION

Switching on the hob and setting the power

Switching off the hob

EN 8
The power has 9 settings. There is also a 'boost' setting, which is
indicated by a 'P.' in the display (see 'Boost').
• Put a pan on a cooking zone.
• Touch the On/Off button.
You will hear a short bleep and the display for each cooking zone
will show '0.'. If no further action is taken, the hob automatically
switches off after 10 seconds.
• Touch and slide your finger over the multi slider of the desired
cooking zone to choose the correct setting. The hob will
automatically start in the chosen setting (if it detects a pan).
▷ Sliding to the right increases the value and sliding to the left
decreases the value.
▷ A direct selection of a value is also possible. Touch the multi
slider somewhere in the slider area to set a power level.
Switching off one cooking zone
A cooking zone is switched on. The display shows a power setting
between 1 and 9, or 'P.'.
• Touch and slide your finger (to the left) over the multi slider of the
desired cooking zone to level '0.'.
Or:
• Directly select setting '0.' by touching the left side of the multi slider
of the desired cooking zone.
You will hear a bleep and the display will show '0.'. If all of the
cooking zones are set to '0.' and if no further action is taken, the
hob automatically switches off after 10 seconds.
Switching off all of the cooking zones at the same time
Several cooking zones are active.
• Briefly touch the On/Off button to switch off all of the cooking
zones at the same time.
You will hear a single bleep. No lights are illuminated. The hob is
now switched off.