Operation; Switching On And Power Setting; Switching Off - Pelgrim IK2064F Notice D'utilisation

OPERATION

Switching on and power setting

The power can be set to 9 different levels. The hob also has a 'boost' setting which is indicated
by a 'P' on the display (see 'Boost'). The front left cooking zone has a 'Power Boost' (SP).
1. Place the pan in the middle of a cooking zone.
2. Press the On/Off button.
▷ You will hear a single beep and a '0' will appear in the display
next to each cooking zone. If you don't do anything else, the cooking zone will switch off
automatically after 10 seconds.
3. Press the on/off button for the cooking zone concerned.
4. The '0' next to the selected cooking zone will light up clearly.
5. Using the – and + buttons select the preferred power level. When you select the – button
directly, the cooking zone will be switched on at power level 9.
▷ The set power is visible in the display.
Please note
• All 4 zones cannot be set to level 9 (or P) at the same time if the appliance is connected to 1
phase. The 4 zones can be set to a maximum level 7 at the same time.
• Another zone needs to be reduced or switched off if a higher level is desired. The appliance
will beep and the set power level in the display will start to flash. You should then set the
zones to a lower level!

Switching off

Switching off one cooking zone
One cooking zone is switched on. The display shows a power level between 1 and 9,
▷
or "P".
1. Press the button for the cooking zone to be switched off. Set the cooking zone to '0' with
the – button.
The cooking zone switches off. The hob switches off after 20 seconds, if all cooking
▷
zones are set to '0' and no other process is being used.
Switching off all cooking zones
Several cooking zones are active.
▷
1. Press the On/Off button to switch off all cooking zones.
▷ You will hear a beep. All displays are off. The hob is switched off.
EN 8