Operation; Settings - Pelgrim IDK754 Notice D'utilisation

OPERATION

Setting
EN 8
The induction hob is fitted with a residual heat indicator, automatic
cooking-time limiter, Easy Cook function and a childproof lock. On this
page and the following ones, you can read how to use these facilities.
Switching on
1. Put a pan on a cooking zone.
2. For the zone required, turn the knob clockwise to set it to the
desired power.
Power setting
1. Turn the knob accordingly to adjust the power.
2. The cooking zones have 9 levels.
• The power for the large zone(s) can be set between 70 and 2300
Watts, for the small zone(s) between 40 and 1400 Watts.
Switching off
• Turn the zone off by turning the knob concerned back to the
starting position.
Easy Cook function
The Easy Cook function is suitable for bringing food to the boil rapidly
and then continue cooking at a lower setting. The hob will automatically
switch to the lower setting to finish cooking.
1. Put a pan on a cooking zone.
2. For the zone required, turn the knob anticlockwise or fully to the
right. "A" appears in the display.
3. Set the desired heat-through setting within 5 seconds using the
rotary knob. If you do not set a heat-through setting, the zone will
be turned off.
Once the heat-through setting has been set, the display will alternately
flash "A" and the set heat-through setting. After the cooking time
has elapsed, the flashing stops and the heat-through setting will be
continuously shown in the display.
• Turn the cooking machine off by turning the knob back to stetting 0
or further to setting 9.