Operation With Control Knobs; Igniting And Adjusting - Pelgrim GK564 Notice D'utilisation

OPERATION WITH CONTROL KNOBS

Igniting and adjusting (GK564/GK575/GK595)
0-setting
High setting
Simmer setting
Burner indication
Read the separate safety instructions before
using the device!
A symbol near the control knob indicates which burner is being
controlled. The burners can be adjusted continuously between the high
and low positions.
Lighting burners with spark ignition
Press the control knob and turn it anti-clockwise to the high setting.
The burner ignites.
Hold the control knob pressed for approximately 5 seconds to activate
the flame failure device.
When the burner does not ignite, check whether:
• the burner cap is placed on top of the burner correctly;
• the burner/spark plug is clean and dry.
EN 7