Data Communication; Telescopic Hanger Bar - human care Roomer S Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 39

Data communication

Roomer S is able to communicate with
a standard PC (Win 7/Win 8). This
communication makes it possible to obtain
statistics and other information on the lift.
To communicate with the overhead lift you
need the Human Care Data and Service
Application, software that can be downloaded
from the Human Care website, www.
humancaregroup.com.
Connect the lift to your PC with a standard
mini-USB cable. Start the Human Care Data
and Service Application and follow the
instructions. The lift must be switched on
for communication to be possible. The lift is
deactivated while communication takes place.

Telescopic hanger bar

The telescopic hanger bar is only avaliable on
lifts with part no: 55030, 55040 and 55050.
www.humancaregroup.com
The following information can be read from
the lift
Article number, serial number and
production date
Max. user weight
Software version
Service dates
Periodic usage statistics
Error log
Connected computer equipment must fulfil the
requirements of IEC 60950-1 or IEC 60601-1
The latest software for the lift should always
be used. You can find the latest version at our
website.
Set the telescopic bar (4) to the prescribed
position. Ensure that the bar hooks are in the
same position on both sides. Place the patient
in the prescribed sling according to the sling
instructions and hang the sling in the hooks on
the telescopic bar and in the leg hook if your
are using threepoint suspension(5). Check that
the sling's lifting straps are properly anchored
in all hooks.
The hooks on the telescopic bar have three
adjustable positions (40, 50 and 60 cm). To
change position, turn the hooks 1/4 turn while
pushing or pulling the hooks to the desired
position. The hooks will automatically fall into
place in the position, and so it is necessary to
repeat the turn (1/4 turn) when passing the
middle position (position 2) (See fig).
Important! Do not hold on to the
o
telescopic bar or the hooks when
performing a lift.
ENG
ENG
31

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

5530055300h

Table des Matières