Using The Lift; Data Communication; Hanger Bar; Lifting Height - human care Altair 55200H Manuel De L'utilisateur

Using the lift
Press the Up button on the hand control or
control panel on the lift to lift the Client. Press
the Down button on the hand control or control
Data communication
Altair is able to communicate with a standard
PC (Win 7/Win 8). This communication makes it
possible to obtain statistics and other informa-
tion on the lift.
To communicate with the ceiling lift you need
the Human Care Data and Service Application,
software that can be downloaded from the Hu-
man Care website, www.humancaregroup.com.
Connect the lift to your PC with a standard
USB-C cable. Start the Human Care Data and
Service Application and follow the instructions.
The lift must be switched on for communica-
tion to be possible. The lift is deactivated while
communication takes place.

Hanger bar

The hanger bar is avaliable as accessory on lifts,
part no:
55751 Hanger Bar Altair/Roomer-S 2P 45 cm
55764 Hanger Bar Altair/ Roomer-S 2P 55 cm
Lifting height
The lifting height corresponds to the difference
between the highest and lowest position the
lift can reach. This corresponds to the length of
the lift belt. The length of the lift belt is 1720
mm/66.1"(300 kg), 2120 mm (150/220 kg).
If you want to extend the lift belt there are
panel to lower the Patient. Pressing the button
activates a soft start, and releasing it causes a
soft stop.
The following information can be read from the
lift
• Article number, serial number and produc-
tion date
• Max. user weight
• Software version
• Service dates
• Periodic usage statistics
• Error log
Connected computer equipment must fulfil the
requirements of IEC 60950-1 or IEC 60601-1
The latest software for the lift should always
be used. You can find the latest version at our
website.
Important! Do not hold on to the
bar or the hooks when performing
a lift.
distance straps in various lengths available as
extras. The lifting height of the lift is not affec-
ted by the length of the distance strap.
The total height of the system consists of the
rail in which the lift is mounted, the rail roller in
the rail, a distance strap if relevant and the lift.
www.humancaregroup.com 29