Intended use
The overhead lift has been designed and tested
for use indoors and is classified as an IPX4
product.
Important! The product must not be
o
immersed in water.
The climatic conditions should be as follows:
ambient temperature from 0 °C to 40 °C,
relative ambient humidity from 30% to 80% and
ambient pressure from 790 hPa to 1060 hPa.
Product label
The product label contains information about
the lift. This label is located underneath the lift.
Wireless transmission equipment, mobile
telephones, etc. must not be used close to the
device as it may affect its function. Particular
caution must be observed when using strong
sources of interference such as diathermy and
such like, to ensure that no diathermy cables
are placed on or near the device. If in doubt,
ask the person in charge of the equipment or
the supplier.
In compliance with / Standards / CE
The product has been tested by an accredited
test institute and complies with necessary
requirements for Class I products, in
www.humancaregroup.com
Wireless transmission equipment, mobile
telephones, etc. must not be used close to the
device as it may affect its function. Particular
caution must be observed when using strong
sources of interference such as diathermy and
such like, to ensure that no diathermy cables
are placed on or near the device. If in doubt,
ask the person in charge of the equipment or
the supplier.
accordance with the directives and regulations
for Medical Devices, MDD 93/42/EEC and
Regulation 2017/745.
ENG
ENG
ENG
25