Operation; Operating Time; Switching On/Off And Speeds - SilverCrest SSMM 600 A1 Mode D'emploi

6. Operation

DANGER! Risk of injury from
cutting!
Never reach into rotating blades. Do
not touch rotating parts with spoons or
similar utensils. Keep long hair or loose
clothing away from rotating parts as
well.
Only switch on the device when the
hand blender 24, the masher 23 or
the whisk 6 is immersed in the food.
The blade assemblies continue to rotate
after the device is switched off. Wait
until the blade assembly has come to a
standstill before you take the hand
blender 24 or masher 23 out of the
food or release the drive cover 8 / 28
from the container.
WARNING!
The device is designed for a maximum
operating time of 2 minutes without in-
terruption (see "Operating time" on
page 30).
In order to prevent damage to the de-
vice, interrupt the blending process im-
mediately if a blade assembly is either
turning with difficulty or not turning at
all. Pull out the mains plug 3 and check
whether there is something in the con-
tainer blocking movement or the food is
too tough. Also check whether the de-
vice is assembled correctly.
30 GB

6.1 Operating time

For the five application areas we recom-
mend the following operating times:
- Multifunction up to 2 minutes contin-
uously, then a 2-minute break
- Chopper up to 2 minutes continuously,
then a 2-minute break
- Hand blender up to 1 minute contin-
uously, then a 2-minute break
- Masher up to 1 minute continuously,
then a 2-minute break
- Whisk up to 2 minutes continuously,
then a 2-minute break
6.2 Switching on/off and
speeds
• Press the controller 2 to switch the de-
vice on.
• The speed increases with the intensity
the controller is pressed. Keep the con-
troller 2 pressed to work in the set
speed.
• Release the controller 2 to switch the
device off.