Intended Purpose; Foreseeable Misuse; Safety Instructions - SilverCrest SSMM 600 A1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44
Thank you for your trust!
We congratulate you on your new Hand
Blender Set Multifunction.
For safe handling of the product and in or-
der to get to know the entire scope of fea-
tures:
• Thoroughly read these user in-
structions prior to initial use.
• Above all, observe the safety in-
formation!
• The device should only be used
as described in these instruc-
tions.
• Keep these user instructions for
information purposes.
• If you pass the device on to
someone else, please include
this copy of the user instructions.
The user instructions are a com-
ponent of the product.
We hope you enjoy using your new Hand
Blender Set Multifunction!
Symbols on your device
The food-safe material of devices
with this symbol will not change the
taste or smell of food.
The symbol identifies parts that can
be cleaned in the dishwasher.
24 GB

2. Intended purpose

The Hand Blender Set Multifunction is solely
intended to chop, stir and purée food. For
each utensil, please observe the area of ap-
plication described in these instructions.
The device is designed for private, domestic
use. The device must only be used indoors.
This device must not be used for commercial
purposes.

Foreseeable misuse

WARNING! Risk of material damage!
Do not use the device for chopping par-
ticularly hard food, e.g. frozen food,
bones, nutmeg, grain, coffee beans or
spices. This device is also not intended
for processing chocolate.

3. Safety instructions

Warnings
If necessary, the following warnings will be
used in these user instructions:
DANGER! High risk: failure to ob-
serve this warning may result in inju-
ry to life and limb.
WARNING! Moderate risk: failure to ob-
serve this warning may result in injury or se-
rious material damage.
CAUTION: low risk: failure to observe this
warning may result in minor injury or mate-
rial damage.
NOTE: circumstances and specifics that
must be observed when handling the de-
vice.

Publicité

Table des Matières
loading

Table des Matières