Chopper; Multifunction Accessories; Multifunction Drive Cover; Separating The Motor Unit From The Accessories - SilverCrest SSMM 600 A1 Mode D'emploi

NOTE: motor unit 1 and masher 23 must
be assembled so that the masher attach-
ment 22 can be firmly tightened and re-
moved again for cleaning after use.

5.4 Chopper

1. Figure D: place the blade assem-
bly 27 vertically on the peg 25 in the
container 26.
2. Fill the chopper container with the pre-
pared food to no more than the mark-
ing max (approx. 500 ml / for liquids
no more than 300 ml).
3. Figure D: place the drive cover 28 on
the container 26. Align the drive cov-
er 28 so that its locks 29 point to the
guides 30 at the container. Turn the
drive cover 28 clockwise until it engag-
es audibly.
4. Figure A: place the motor unit 1 on
the drive cover 28 and press it down.
The motor unit 1 must engage audibly.

5.5 Multifunction accessories

Chopping
1. Figure E: place the blade assembly 14
on the peg 18 in the container 15.
2. Fill the container 15 with the prepared
food to no more than the marking
max. (approx. 2000 ml / for liquids
no more than 1250 ml).
Cutting and grating
1. Figure F: push the slicing insert/grat-
ing disk 20 onto the spacer 19. For
cutting, the blade points in the direction
of the lid. For grating, turn the disk
around.
2. Figure F: place the spacer 19 with the
mounted slicing insert/grating disk 20
on the peg 18 in the container 15.
Dicing
1. Figure G: place the disk insert 12 into
the container 15. Here, align the disk in-
sert 12 so that its recesses engage in the
recesses at the container 15.
2. Place the blade assembly 11 on the
disk insert 12.

5.6 Multifunction drive cover

1. Figure H: place the drive cover 8 on
the container 15. Align the drive cov-
er 8 so that the marking
handle 17 points to the attachment
marking 32.
2. Figure H: turn the drive cover 8 clock-
wise until it engages audibly. Now, the
marking 31 points to the lock
marking 33.
3. If necessary, insert the food pusher 7
into the refill opening 9.
4. Figure A: place the motor unit 1 on
the drive cover 8 and press it down.
The motor unit 1 must engage audibly.
5.7 Separating the motor
unit from the accessories
• Figure A: in order to release the motor
unit 1 press both buttons 4 and remove
the motor unit 1 from the accessories.
31 at the
29
GB