English; Intended Use; Technical Data And Assembly; Maintenance - Bien-Air Dental S001 Mode D'emploi

English

Typ
S001
pneumatic module, tabletop model.
SF 811
pneumatic module, model for fixed
installation, to be mounted upright.
STS Trimmer
pneumatic module with water reser-
voir, 1.4 liter.
These modules are equipped with a
pedal, a pressure gauge with pressure
relief device and a turbine support.

Intended use

Product intended for professional
use only. These modules are de-
signed for laboratories and for pros-
thetic and ceramic work. Not de-
signed for clinical applications.

Technical data and assembly

S001 assembly
SF811 mounting
STS Trimmer
Classification
Conforms to machinery directive
98/37/EC.
Dimensions L x D x H
S001: 140 x 113 x 163 mm
SF 811: 86 x 75 x 165 mm
STS Trimmer: 288 x 156 x 195 mm
Weight
S001: 1,250 g
SF 811:
STS Trimmer: 3,200 g
Air pressure at inlet
S001 & SF 811 & STS Trimmer:
min. 500 kPa and max. 800 kPa
Air consumption output
S001 & SF 811: 35 normliter/min
STS Trimmer: 40 normliter/min
Air pressure output
S001 & SF 811: 250 kPa - 300 kPa
The unit is delivered with a pre-
adjusted of 300 kPa.
STS Trimmer in accordance with
fig. 1 indications on the unit.
fig. 2
fig. 3 Do not use the turbine at above
the required air pressure (see
instuction REF 2100038).
STS Trimmer
1. Filling the water tank
Slowly unscrew the tank plug to de-
pressurise. Fill the tank with dis-
tilled or demineralised water
using the enclosed accessories. Screw
the tank plug down without tigh ten-
ing, and the tank is pressurised
300 g again.
2. Actuation and adjustment of
the spray
Actuate the spray by switching the
lever to ON. The water flow is adjust-
ed with the green adjusting screw,
and the air flow with the blue adjust-
ing screw. Do not use an excessive
quantity of water, since the period
of use between filling operations
depends on this.
3. Operation
Select Spray OFF/ON. Actuate the
pedal, the turbine starts rotating and
the spray is actuated in accordance
with the selected mode.
4. Manometer-pressure regula-
tor with filter
This device has been designed with
an automatic drain outlet; to acti-
vate this function, it is recommend-
ed to depressurise the STS Trimmer
once a week.

Maintenance

Only use maintenance products and
components from Bien-Air Dental.
The use of other products and com-
ponents can void the guarantee.
Clean the unit with water and dish-
washing detergent.
Never immerse in disinfectant solu-
tions.
Not suitable for ultrasonic bath.
88