Components; Correct Use - Meister MBS600-1 Traduction Du Manuel D'utilisation Original

The specified overall vibration values
and specified noise emission values
can be used to establish a preliminary
evaluation of the load.
Warning: The vibrations and
noise emissions generated when
the power tool is actually being used
may deviate from the specified values
de pending on the way in which the
power tool is used, specifically, on the
basis of the type of workpiece being
processed.
Try to keep the vibration load as low
as possible. Examples of measures
de signed to reduce the vibration load
in clude the wearing of gloves when
using the tool and the limitation of
working times. All parts of the operat-
ing cycle are to be taken into account
for this purpose (for example, also
in clud ing times in which the power tool
is switched off and times in which it
is switched on, but is running without
load).
3 – Components
1 On/Off switch
2 S top button for continuous
operation
3a/3b Handles
4 Wall stopper
5 Belt adjuster
6 Sanding belt guide
7 Dust collection box
8 Sanding belt tensioning lever
9 Power cable
10 Sanding belt
11 Sanding disc
12 Dust exhaust outlet
13 Drive belt cover
14 Vacuum adapter, 2-pieces
15 Revolution pre-select
16 Arrow marking
17 LED operating display
18 Cleaning flap
36
MW-5455650-Bedien-2009.indd 36 MW-5455650-Bedien-2009.indd 36
4 – Correct use
This belt sander only operates in dry
sanding mode. In conjunction with
suitable sanding belts, it is designed for
surface sanding large, even surfaces
made of wood, metal and plastic in a
domestic setting. All other uses are
expressly forbidden.
This device is not designed to be used
by people (including children) with limited
physical, sensory or mental capacities or
those without experience and/or know-
ledge. Children should be supervised
to ensure that they do not play with the
device.
This unit is only designed for private use.
Improper use
All uses of the device that are not listed
in the „Correct use" chapter will be
considered improper use.
Uses for which the tool is not designed
may cause risks and injuries. Do not
use accessories that are not intended
specifically for this electrical tool.
There is a risk of injury. The user of
the device is liable for all property and
personal damages occurring as the
result of incorrect use.
If other components or non-original
components are used with the machine,
the manufacturer guarantee is voided.
Remaining risks:
The operating instructions for this
electrical tool contain comprehensive tips
for the safe handling of electrical tools.
However, every electrical tool has a certain
level of remaining risks which cannot be
excluded by the protective mechanisms
on the device. Always operate electrical
tools with the necessary care.
16.09.20 15:25 16.09.20 15:25