Meister MBS600-1 Traduction Du Manuel D'utilisation Original page 35

Operating instructions & safety hints
WARNING! To reduce the risk of injury, please read the operating instruc-
tions through carefully before using the device, and then store with the
machine! When passing the device on to another user, these operating inst-
ructions must also be included!
Contents
1 - Scope of delivery
2 - Technical information
3 - Components
4 - Correct use
5 - General safety
instructions
6 - Safety instructions
relating specifically to
the equipment
1 - Scope of delivery
• B elt sander
• D ust collection box
• 1 fabric belt K80
• 1 vacuum adapter, 2-pieces
• Operating Instructions
• Guarantee
2 - Technical information
Technical data
Power supply
Nominal
consumption
Belt speed
Sanding belt
Mains connection
cable
Weight
Technical changes reserved.
is a registered trademark of
Conmetall Meister GmbH
Wuppertal/Germany
MW-5455650-Bedien-2009.indd 35 MW-5455650-Bedien-2009.indd 35
Page
35
35
36
36
37
39
230 V~/50 Hz
600 W
V 170-250 m/min
n
75 x 457 mm
300 cm
2.5 kg
7 - Installation and setting
8 - Operation
9 - Mode of operation
10 - Maintenance and
environmental
protection
11 - Service instructions
Noise emission/vibration
Noise emission
L : 87.0 dB(A), L : 98.0 dB(A)
pA WA
Measuring inaccuracy:
K : 3.0 dB(A), K : 3.0 dB(A)
pA WA
Hand/arm vibrations
Handle (3a): a : 2.5 m/s
h
Handle (3b): a : 3.1 m/s
h
Measuring inaccuracy K: 1.50 m/s
Noise/vibration information
Measured values determined in
accordance with EN 62841-1.
The specified overall vibration values
and specified noise emission values
were measured in accordance with a
normed test procedure and can be used
in order to compare one power tool with
another.
Page
40
41
42
42
43
,
2
,
2
.
2
35
16.09.20 15:25 16.09.20 15:25