Components; Correct Use - Meister FW250M Traduction Du Manuel D'utilisation Original

MW-5410350-Bediene-1501 13.01.15 11:55 Seite 37
If your hands experience an unpleasant
sensation or the skin changes colour
whilst you are using the machine, stop
using the machine immediately. Take
sufficient breaks. If you do not take
sufficient breaks, this may cause a
hand-arm vibration syndrome.
An estimate of the level of load in
conjunction with the work or use of the
machine should be carried out and
breaks set out accordingly. This method
can be used to considerably minimise
the level of load during the entire
working time. Minimise risks, which
expose you to vibrations.
Take care of your machinery in
accordance with the directions in the
operating instructions. If the machine is
to be used frequently, contact your dealer
and procure anti-vibration equipment
(handles) if necessary. Avoid using the
tool at temperatures of t = 10 °C or lower.
Draw up a working schedule, which can
be used to minimise vibration loads.
WARNING: A certain amount of noise is
unavoidable when using this device.
Ensure you carry out noise-intensive work
only during permitted times. Maintain the
quiet periods and limit your work to the
absolute minimum. For the sake of your
personal protection and the protection of
persons in close proximity, suitable
hearing protection should be worn.
3 – Components
1 On/Off switch with lock function
2 Tool holder
3 Saw tool
4 Scraping tool
5 Holding screw with washer
6 Adjustment key
7 Sandpaper
8 Triangular sander adapter
All manuals and user guides at all-guides.com
4 – Correct use
Application range
The electrical tool is designed to saw
and separate wooden materials, plastic,
gypsum, non-ferrous metals and
securing elements (e.g. nails, staples). It
is likewise suitable for processing soft
wall tiles as well as for dry grinding and
scraping small areas. It is particularly
suitable for jobs, which are flush to
edges and flush with the surface.
Only accessories suitable for the tasks
listed above may be used.
Improper use of the product
All uses of the device that are not named
in the "Intended use" chapter or that are
carried out using unsuitable accessories
are considered improper use.
The grinding machine is not a polishing
machine. It is not suitable for polishing
cars or metal surfaces.
There is a risk of injury!
The user of the device is liable for all
property damage and personal injuries
occurring as the result of incorrect use.
The manufacturer warranty is voided if
other components or non-original
components are used with the machine.
Residual risks
Some residual risks do still remain,
despite the specific safety measures
listed in the operating instructions,
safety notes and additional safety
regulations, for example, unintentional
operation of the product. If the
directions in your operating instructions
are not observed, incorrect use may
result in other residual risks.
37