Components - Meister MF400-1 Traduction Du Manuel D'utilisation Original

The specified vibration emission value
and the specified noise emission values
can also be used as an initial estimate
of the impairment.
Warning: The vibrations and noise
emissions generated when the
power tool is actually being used may
deviate from the specified values
de pending on the way in which the
power tool is used, specifically, on the
basis of the type of workpiece being
processed.
Safety measures must be taken in
order to protect the operator. As a
result, the evaluation of the influence
must be made whilst taking account
of the actual conditions of use. (All
parts of the operating cycle must be
taken into account for this purpose.
This also includes times in which the
power tool is switched off and times
in which it is switched on, but is run­
ning without load.)
CAUTION! A certain amount of
noise is unavoidable when using
this device. Ensure you carry out
noise­intensive work during permitted
times. Maintain the quiet periods and
limit your work to the absolute mini­
mum.
CAUTION! The effects of noise
may cause damage to the hear­
ing. Only ever work with suitable ear
defenders. Anybody else in the vicini­
ty should thus also wear ear defend­
ers.
3 – Components
1 Belt speed regulator
2 Main handle
3 Safety lock
4 On/Off switch
MW-5455840-Bedien-1904.indd 35
5 Side handle
6 Clamping lever
7 Assembly/adjustment screw
8 Sanding head holder
9 Belt stopper surface
10 Roller guide
11 Sanding head
12 Sanding belt
13 Sanding belt holder
14 Dust exhaust outlet
15 Dust collection bag
16 Spiral spring
4 – Application
The electrical power file only operates in
dry sanding mode. When used with the
appropriate sanding belts, it is suitable
for work on wood, metal and plastic sur-
faces, examples include:
- Sanding curved surfaces
- Sanding welds
- Tidying up holes
- Cleaning and removing rust
- Grinding blades
All other uses, including use whilst sta-
tionary are prohibited.
This unit is only designed for private
use.
The sanding belts included as part of
the scope of delivery are suitable for
both wood and metal surfaces.
Improper use of the product
All applications carried out with the
device that are not listed in the „Proper
use" chapter will be considered improp-
er use.
Uses for which the tool is not designed
may cause risks and injury. Do not use
accessories that are not intended spe-
cifically for this electrical tool.
35
19.07.19 09:17