Würth 1952 003 240 Traduction Des Instructions De Service D'origine page 18

(fig. 24).
• After completing the thread, use the guide-body
(ref. 1952 003 249) + thread insert ¼" (ref. 1952 003
262) + nut CH30 and start screwing (fig. 25 - 26); go on to
remove completely the glow plug (fig. 27).
• Use male M10 included in the kit (ref. 1952 003 260)
(fig. 28) to renew the thread on which the new glow plug will
be assembled.
N.B. Strew the male with some grease to keep the scraps
and avoid that the scraps of the tapping enter the seat of the
glow plug.
18
24
26
27
28
25