All Models; Model Description - Hatco CSUR Série Manuel D'installation

English

All Models

Hatco Remote Built-In Cold Shelves are reliable and versatile.
Each unit has an insulated, stainless steel and aluminized
steel housing. A copper evaporator coil wound under the entire
hardcoat aluminum or stone surface provides even chilling
from edge to edge. Hatco Remote Cold Shelves are designed,
manufactured, and tested to maintain safe food holding
temperatures.
Controls for the Built-In Cold Shelves are housed in a single,
remote-mountable control box. They include a Power I/O (on/
off) Switch and a digital temperature controller. The control box
is field connected to the shelf and the condensing unit (remote
condensing unit models only).
Depending on the model, Built-In Cold Shelves are designed to
be mounted to the top side, bottom side, or underneath various
types of countertop material including stainless steel, wood,
Corian, and Swanstone.
The ecoization logo identifies products designed to reflect
Hatco's commitment to improving, protecting, and preserving
the global environment. Hatco Remote Built-In Cold Shelves
qualify for the ecoization logo through the use of eco-friendly
insulation as well as a highly efficient condensing unit.
NOTE: Stone surfaces are a simulated stone solid surface.
CSBFR Models
CSBFR models have a hardcoat aluminum surface and are
top mounted.
CSBFR-48-S/CSBFX-48-S
Form No. CSRM-0220
CSUR-48-S/CSUX-48-S

MODEL DESCRIPTION

CSSBR and CSSBFR Models
CSSBR and CSSBFR models have a decorative stone surface
and are bottom mounted.
CSUR Models
CSUR models have an aluminum surface and are mounted
directly against the underside of a granite or quartz countertop
(no cutout required). Cooling transfers through the countertop
to the top side for a true, seamless installation.
NOTE: For CSBFR, CSSBR, CSSBFR, and CSUR models,
all plumbing and electrical connections between the
components as well as to the electrical supply are the
responsibility of the end user and a qualified installer.
CSBFX Models
CSBFX models have a hardcoat aluminum surface and are top
mounted. They are not supplied with a condensing unit.
CSSBX and CSSBFX Models
CSSBX and CSSBFX models have a decorative stone
surface and are bottom mounted. They are not supplied with a
condensing unit.
CSUX Models
CSUX models are similar to CSUR models, but are not supplied
with a condensing unit.
NOTE: CSBFX, CSSBX, CSSBFX, and CSUX models must
be connected to an end user-supplied condensing unit.
All plumbing and electrical connections between the
components as well as to the electrical supply are the
responsibility of the end user and a qualified installer.
CSSBR-4818/CSSBX-4818
Control Panel
(All Models)
5
Condensing Unit
(CSBFR, CSSBR, CSSBFR,
and CSUR Models only)