All Models; Model Description - Hatco HCSBF Série Manuel D'installation Et D'instructions

English

All Models

Hatco Hot/Cold Built-In Shelves are reliable and versatile. Each
unit has an insulated, stainless steel and aluminized steel
housing. For hot operation, a surface-mounted, rope-style
heating element distributes heat evenly under the entire
hardcoat aluminum or stone surface. For cold operation, a
copper evaporator coil wound under the entire hardcoat
aluminum or stone surface provides even chilling from edge to
edge. a condensing unit is connected to the evaporator coil with
a flexible tubing assembly. Hatco Hot/Cold Built-In Shelves are
designed, manufactured, and tested to maintain safe food
holding temperatures.
Controls for the Hot/Cold Built-In Shelves are housed in a
single, remote-mountable control enclosure. They include a
three position Power Switch and two digital temperature
controllers. The control enclosure is connected to the
condensing unit with a 4' (1219 mm) power cord and to the
heating element with a 4' (1219 mm) conduit assembly.
Depending on the model, Hot/Cold Built-In Shelves are
designed to be mounted to either the topside or bottomside of
various types of countertop material including stainless steel,
wood, Corian, and Swanstone.
The ecoization logo identifies products designed to reflect
Hatco's commitment to improving, protecting, and preserving
the global environment. Hatco Hot/Cold Built-In Shelves qualify
for the ecoization logo through the use of eco-friendly insulation
as well as a highly efficient condensing unit.
Form No. HCSm-0416
Model HCSBF-48-S
Model HCSSBF-48-S
Hot/Cold Shelf models

MODEL DESCRIPTION

HCSBF Models
HCSBF models have an hardcoat aluminum surface and are
top mounted.
HCSSB and HCSSBF Models
HCSSB and HCSSBF models have a decorative stone surface
and are bottom mounted.
NOTE: Stone surfaces are a simulated stone solid surface.
5
Model HCSSB-4818