Image Download Using The Camera Wizard; Image Download Using Arcsoft Photoimpression; Saving Images With Arcsoft Photoimpression; Video With Arcsoft Photoimpression - Minox Leica M3 2.1 Notice D'utilisation

connect the DCC to your computer using the provided
USB cable. For Windows 98/SE users, please make sure
when you are connecting the camera to the computer
the first time, the DCC CD-ROM is positioned in the CD-
ROM drive. Please follow the instructions given above
for connecting your camera to your PC.

Image download using the Camera Wizard

With the Camera Wizard you can download images to
your PC, store the images, view them in succession as a
running slide show or run your own short video.
1. Connect the DCC to your PC using the
provided USB cable.
2. Double click on „My Computer".
3. You will now see that a new drive „Removable
Disc" has been created. Double click on this.
4. All image files stored in the camera now appear on
the screen of your computer.

Image download using ArcSoft PhotoImpression

Please follow the instructions given below to download
images on your PC using ArcSoft PhotoImpression 3.0.
1. Connect your DCC to your PC as described above
using the provided USB cable.
2. Start the ArcSoft PhotoImpression software as follows:
Start > Programme > ArcSoft PhotoImpression >
PhotoImpression.
3. Select „Get Photos" from the left panel.
4. Click on the symbol „from Folder" at the
bottom edge of the screen.
5. Click on „Browse" and select the drive
„Removable Disc".
6. Select the folder in which the images are stored,
this folder is then displayed on the screen.

Saving images with ArcSoft PhotoImpression

After downloading all selected images onto your PC,
please then follow the instructions given below to save
them on your PC.
1. On the ArcSoft PhotoImpression screen, click on the
screen in the left panel on the symbol „Save" and
then further down in the screen on „Save as".
2. When the save window opens select a directory in
which you wish to save your images, give the image
file a name and click on „Save".

Video with ArcSoft PhotoImpression

You can use your DCC as Web Cam for recording short
video sequences. Follow the instructions given below to
switch the camera to the video mode.
15