Troubleshooting - Minox Leica M3 2.1 Notice D'utilisation

Troubleshooting

These guides are to help you cope with typical problems that may arise. Should the problem remain or if you require
further assistance, please contact our technical customer service. The technician will pleased to assist you. In the
attachment you will find all the necessary addresses and further technical specifications.
Problem
I can't load images onto my PC.
my images are blurred.
When I press the release
nothing happens.
I have found an error message
in the software installation.
Symptom
Faulty connection.
Could be due to instantaneous
delay between the pressing
of the release and the
shooting of the image.
Between the pressing action and
the release 2 to 5 seconds
may elapse, depending on whether
the flash is activated or not.
If several of the DCC programs
are already installed on your PC
the installation could cause
an error message.
Remedy
Check all connecting cables.
Hold your LEICA M3 2.1 steady
until you hear the beep sound
that indicates the shot has
been taken.
Wait until the flash is activated
again (signal lamp flashes) or the
image data have been stored in
the memory of the camera.
Reinstall the software and select
the user-oriented installation.
19