Video Conference; Image Processing On The Pc; Loading Still Images - Minox Leica M3 2.1 Notice D'utilisation

signal confirms the alteration. After changing the
Hr/Lr mode, the camera will automatically reset to
basic mode.

Video conference

Your DCC can be used as Web Cam for video conferences.
Please follow the instructions given below for this pur-
pose.
1. Switch on your DCC by pressing
the On/Mode button.
2. Press the On/Mode button until the mode
for video conferences „VC" appears.
3. Press the shutter release to confirm and set this
mode. The flashing stops and „VC" is displayed.
4. Connect the Camera to your PC via the provided
USB cable.
5. Start the ArcSoft PhotoImpression software as
follows: Start Programme
sion PhotoImpression.
6. Click on "Get Photos" and select "Camera/Scanner"
7. Click on " Icon"
8. Select "Live" to show the video.
14
ArcSoft PhotoImpres-
Note
Video Conference is available in PC only.
Web Cam Brightness Adjustment
The Camera is preset to auto –brightness mode during
web-cam operation. It means the web-cam will adjust the
brightness automatically according to the ambient light
intensity. But, you can follow the below instruction and
change the brightness to any fixed level you prefer.
1. Click on " " in the PhotoImpression
2. Click on " Source "
3. You will see the brightness level and "
4. Un-check the " " to make it empty "
(The web cam is now set to manual brightness mode)
5. You can change the brightness value according to your
preference.
(for normal office enviroment, the value should be ~5000)
6. Click "yes" to confirm.

Image processing on the PC

Loading still images

Downloading still images from your DCC to your PC.Turn
on the camera and select the camera mode (with LCD
displaying 2 digits). To download images onto the PC,
"
"