Installing Arcsoft Photoimpression; Connecting The Dcc To Your Pc - Minox Leica M3 2.1 Notice D'utilisation

Contents of the DCC CD-ROM
• DCC Camera Driver for Windows 98/SE/ME/XP
and MacOS 9.x
• Web-Cam driver for Windows 98/SE/ME/XP
• ArcSoft PhotoImpression 3.0 Software for
image editing
(Not included in Airline-Version)
• User manual as PDF
• Acrobat Reader
Note
Windows 2000, Me and XP, and MAC OS employ MASS
STORAGE method to upload images from camera to com-
puter. Therefore, no Camera Driver is necessary for image
transfer. MAC OS only support still image transfers.
There is no WEB-CAM feature on MAC OS.

Installing ArcSoft PhotoImpression

Please proceed according to the instructions specified
below to install the ArcSoft PhotoImpression software.
1. Insert the enclosed DCC CD-ROM in the CD-ROM
drive of your computer
8
2. Select the language you wish to use.
3. Click on „Continue" on the start page to continue
the Setup.
4. Click on „Yes" on the page with the terms and
conditions, after reading them, to accept these
conditions and to continue with the Setup.
5. Select the storage location on your PC where you
wish to install the software and click on „Next".
6. The Setup bar appears. Please wait until this
bar disappears to continue.
7. Click on „Finish" to conclude the setup.
Note
The ArcSoft PhotoImpression Software is not included in the
Airline-Version CD. You may use other image editing soft-
ware as well. Please contact our customer service and ask
for the ArcSoft PhotoImpression CD-Rom, if requested.

Connecting the DCC to your PC

For connection to the PC the DCC must always be in
camera mode (LCD display: 00), except in WebCam
mode or during video conferences. To download images
onto the PC connect the DCC to your computer using
the provided USB cable. Please make sure when you are
connecting the camera to the computer the first time