IMG STAGELINE DMX-510USB Mode D'emploi page 39

USB B connector as input
3-pole XLR jack as DMX output
5-pole XLR jack as DMX output
DC jack for the voltage supply
Voltage supply: 9-12V DC or 9-12V AC, 200 mA max.
Dimensions: 115 mm x 103 mm x 37 mm
Weight: 350 g (net)
4 Additional Information
When using long DMX cables, it is recommended to use plug with a terminator resistor (e.g. DLT-123 from
IMG StageLine). This XLR plug has to be connected to the DMX output at the last DMX device of an DMX
queue. For DMX devices with a switchable terminator resistor this step is not necessary. Matching
connectors with resistors already integrated can also be purchased from all MONACOR retailers:
Item no. DLT-123 for 3-pole DMX jacks;
Item no. DLT-125 for 5-pole DMX jacks.
The software for DMX-60/120/510USB is continuously extended and matched according to the requirements
of the customers. The latest version of the software can be found on the MONACOR website:
http://WWW.MONACOR.DE under "Support" – "Software Updates".
Back