IMG STAGELINE DMX-510USB Mode D'emploi page 34

2.5.4 DMX
2.5.4.1 DMX Start/ DMX Freeze
With "DMX Freeze" the DMX output at the printer port is stopped, with "DMX Start" it is restarted. The
fader settings are maintained. An automatic sequence run continues but it is not passed on (in case of DMX
Freeze).
2.5.4.2 Move Channels
With this function, channels with all functions and names can be moved into another range.
Example:
A library for the TWIST-252 with the start address '1' has been loaded. Scenes and sequences for this address
have been loaded as well. All functions of the TWIST-252 are now distributed to the channels 1-13.
However, the user now finds out that for the Moving Head TWIST-252 to be controlled the address 49 has
been adjusted instead of the address 1. The user is not able to easily change the start address of the TWIST -
252 because the Moving Head has been mounted under the ceiling at a height of 5 m. Thanks to the function
'Move Channels' not all fader names, fader functions, scenes, and sequences have to be rewritten. If 'Move
Channels' is called, first the channel range to be moved has to be entered (here: 1 -13). Then the first new
channel for the unit has to be entered, in this case the channel 49. After confirmation of the input (OK) all
functions for the TWIST-252 are now to be found on the channels 49-61. Also the assignments of the
channels for loaded scenes and sequences have been adapted correspondingly.
2.5.5 Program
2.5.5.1 Create Scene
see under item 2.1.11
2.5.5.2 Call Scene
For direct calling of a scene, enter the scene number and confirm with "OK". A much easier way to call a
scene is to press the 's' button on the keyboard and enter the scene number and confirm with "OK".
2.5.5.3 Save Scenes
It is possible to save the adjusted scenes in one block (500 scenes max.) under any desired name under this
menu item so that the adjusted scenes will not get lost when switching off the computer. The scene files of
DMX-510USB have the extension ".sce".
2.5.5.4 Load Scenes
A scene block consisting of max.500 scenes is loaded. Attention: Existing scenes will be overwritten!
2.5.5.4.1 Load additional Scenes
For not overwriting existing scenes the user has to load scenes with this menu item. The loaded scenes are
added to the existing scenes on the scene desk.
Back
2.5.5.5 Create Sequence