Beta 3070BE/K Mode D'emploi page 27

INSTRUCTIONS FOR USE
EN
4. Mark the positions of the rim and tyre, and turn the tyre on the rim, until the positions coincide, to reach such
optimisation as shown on the displays.
To cancel optimisation at any time, press
SETUP
Menu
This is used to customize some functions of the wheel balancer and to perform calibrations. To access this
section, press the MENU button.
POSITION TYRE
POSITION RIM
See section UNBALANCE OPTIMISATION
See section SELF-DIAGNOSTICS
See section WHEEL BALANCER CALIBRATION
RETURNS TO MEASUREMENT SCREEN
diameter unit
of measure mm/inch
width unit
of measure mm/inch
approximates
1-5-10 g / 10-25-50 oz
default 5 g / 25 oz
tolerance
5-10 g / 25-50 oz
default 5 g / 25 oz
g/oz unbalance
unit of measure
speed setting
measurement start
27