Advanced Operations; Transmit Power; Calling Alert (Fleetsync/ Mdc-1200 Only); Key Lock - Kenwood TK-2312 Mode D'emploi

TRANSMIT POWER

Each channel is programmed with either high or low transmit
power. On high transmit power channels, press the key
programmed as [Low Transmit Power] to change the transmit
power to low power (you cannot change low transmit power
channels to use high power).
• The indicator appears while using low transmit power.

CALLING ALERT (FleetSync/ MDC-1200 ONLY)

The Calling Alert tone alerts party members that you are
making a call. To make a call using Calling Alert:
1 Briefl y press and hold the key programmed as [Calling
Alert].
• Release the key to end the tone transmission.
2 Press the PTT switch and speak into the microphone in
your normal speaking voice.

KEY LOCK

Press and hold the key programmed as [Key Lock] for
2 seconds to lock the transceiver keys. Press and hold the
[Key Lock] key again to unlock the keys.
• LOCKED
"
are locked.
Note: You can still use the following keys and functions when Key
Lock is activated: [Emergency], [Lamp], [Monitor], [Monitor
Momentary], [Squelch Off], [Squelch Off Momentary], [Key
Lock], PTT.

SEND THE GPS DATA

Press the key programmed as [Send the GPS Data] when the
GPS unit has been installed, to send your positioning data to
the base station.

ADVANCED OPERATIONS

appears when a key is pressed while the keys
"
23