Transfer (To D200S); Transfer + Save (To D200S); Reset Unit - sylvac D200S Manuel D'utilisation

4.1.11 Transfer (to D200S)

4.1.12 Transfer + Save (to D

4.1.13 Reset unit

Transfer the PC configuration in to the D200S
The configuration of the PC will be
transferred to D200S unit (temp
* with the extinction of the unit D20
D200S will take again its basic
200S)
Transfer the PC configuration in to the D200S
(Flash Memory)
The configuration of the PC will be
transferred to D200S unit (Flash Memory)
* The new configuration could not be erase.
Another configuration could be flashed on
top.
Reset of the unit
Unit D200S will be re-initialized accord
factory parameters.
Activate «Transfert+Save (to D200s)» to
save all new parameters into the unit.
96
E
orarily)
0S, the
configuration.
ing to