Precautions; Important Information - sylvac D200S Manuel D'utilisation

1 Precautions

CAUTION:
- Never expose the D200S unit to water or moisture.
- Never use the D200S unit outside.
- Use the D200S unit at a temperature between 0 and 40°C.
- The manufacturer declines all responsibility in case of damage
due to an inappropriate use of the D200S unit.
- Not to use aggressive products (Alcohol, trichloroethylene, etc.) to
clean the synthetic parts.

1.1 Important information

Minimum configuration Hardware
Pentium processor or equivalent.
(Pentium 600 MHz or higher is recommended).
A computer functioning under Windows 2000 or Windows XP operating system.
Stability of the unit :
The D200S unit must be switch ON ~30 minutes before all measurements.
76
E