Sub-Menu Simulation Mode - sylvac D200S Manuel D'utilisation

4.1.6 Sub-menu "Simulat
T his menu allows the simulation of the digital outputs and the external contacts.
Shows the saved file
The actions of the external
contacts and the switches
1/2 are saved in a file
(saved in installation
program)
Indicates the configuration
of the digital outputs
(Master Tol or Channel Tol)
Description of the "Log" file
Indicates the config. of the digital outputs:
Master Tol 0 : Channel Tol
Master T ol 1 : Master Tol
In dicates used channel
S witch n°1 : foot pedal
S witch n°2 : switch 1
S witch n°3 : switch 2
P erforme d function:
NO_FCT : no function
Print : activates the data transfer
Preset : activates the "Preset" value setting
Clear : initializes the min, max, ... values
D110 D : activates the downward move.of probes (D110)
D110 U : activates the upwards move. of probes (D110)
D110 T : activates upw./downw. move.of probes (D110)
Hold g : activates lock-in of values
Hold i : deactivates lock-in of values
H old j : activates/deactivates the lock-in of values
P ause h : activates the "Pause" function
P ause k : deactivates the "Pause" function
P ause l : activates/deactivates the "Pause" function
P RISEQx : sends the values of the channels selected
according to menu "sequence configuration"
DIGOUT : changes the configuration of the digital outputs
ion Mode"
The active digital outputs are
mentioned in green
Indicates the active
digital output
Indicates the unit used for
activation of the contact:
Unit n°0
Unit n°1
Unit n°2
92
Simulates an action on the
concerned contact
Activates successively the
frontal LED's and t
the digital outputs
Date and time of the
measured value
: first unit
: second unit
: third unit
E
hose of