Connection (Software) With D200S Unit - sylvac D200S Manuel D'utilisation

3 .6

Connection (software) with D200S unit

In order to connect the software with the D200S unit, click on the activation icon to
e nable the software and the unit.
W ait until the message. « Waiting for synchronisation... » disappears.
Note: the port of communication
(in the gray zone) then by select
The port number allocated by W
managers ("control panel /syste
"). The D200S appears as "a USB Serial Port". Each D200S connected to the PC will
have a COM port which will be a
Enables/Disables the
communication between the
software and
can be configured in the software by a right clickin
ing "RS232 Setup".
indows can be visualized by o
m" then select "material" and
llocated for it.
85
unit D200S
pening the peripheral
"peripheral managers
E
g