sylvac D200S Manuel D'utilisation page 102

To save the current configuration tem
Transfer (to D200S). The configuration will be saved until the extinction of the
D200S unit.
To save the current configuration definitively in the D200S unit, use the Transfer +
Save (to D200S). The configuration will be saved definitively in the D200S unit.
4. The configuration of cha
(A+B) + (C+D) will be as follows :
Setting
Upper Tol. = 0.025
Lower Tol. = 0
Nominal Value = 0
Preset Value = 0
Measuring directio
Increase / positive (+)
Ext. / External m
Mode
Delta
Math function
Factor A = 1
Channel A =
+
Factor B = 1
Channel B =
5. Active the Delt
on the icon :
6. Turn the part (360°)
7. The disp
Channel 1 : direct value of probes
A+B
Channel 3 : direct value of probes
C+D
Channel 4 : delta value of probes
8. Re-initialization is made by t
Clear ico
porarily in the D200S unit, use the menu
102
nnel 4
n and mode
easurement
1
3
a mode by clicking
MinMax
lay will indicate :
(A+B)+(C+D)
he
n.
E