Hardware Connection Between D200S Unit And Pc; Installation Of Usb Pilot - sylvac D200S Manuel D'utilisation

3

.3 Hardware Connection between D200S unit and PC

1) Switch ON your PC.
2) Connect the USB plug of the D200S to the USB
cable.
3 ) Connect the probes to the Tuchel connectors of the D200S unit.
4 ) Connect if necessary the digital outputs.
5) Connect the sector adapter to the socket 9V of the D200S unit.
Caution : Use the sector adapter provided exclusively.
The use of an erroneous sector adapter can damage the D200S unit.
6) Connect the sector adapter to the main power.
7 ) Switch ON the D200S unit then the 3 led's of tolerances flicker during a short
moment and the PC detects the D200S unit automatically.

3.4 Installation of USB pilot

As soon as the PC detected the D200S unit, follow the requests on the screen to
install the necessary pilots.
Windows XP
T he Add assistant of material appears on the screen
A) Select Install from specific directory (experienced u
B) Select CD-Reader and click on Next to search
T he place of the pilot file is: D:\Drivers\WindowsXP, if your CD reader of CD has the
letter D. If not, indicate the valid letter of your system.
C) O nce that the assista
inst all the nec essary
Note: if the m essa ge "
click on "Yes" to continue the
D) Once that th e assistant o esearch for new materials finished the installations,
click on " Finis h".
E) If the update of assistant of material appear again. The points A, B, C and D
should be carried out a second time.
F ) Continue by "Checking of frontal LED indicators "
nt o f material fun
pilot files.
not fou nd the numerical Signature" appears on the scree
installation.
f r
83
port of your PC with USB
sers) and click on Next.
the files of the pilots necessary.
d the results of research, click on Next to
E
n,