Sub-Menu Sequences Configuration - sylvac D200S Manuel D'utilisation

4.1.3

Sub-menu Sequences Configuration

Configuration of the measuring sequences
This configuration allows the assignment of a
certain number of channels to a sequence,
in order to send on Excel (or other), that values
introduced for a sequence given.
It is possible to configure up to 8 sequences.
* The use of the preset and the send are affected
by the configuration of the sequences, by default
only the sequence I is activated and all the
channels are selected.
Example :
1st sequence (I), channel 1 is selected.
The data acquisition on (Excel) will be, for each
transmission.
Send the value
0.001(1st sequence) (Chann
Send again
0.001 1st sequence) (Channel 1)
2 s equences
1st sequence (I), channel 1 is selected.
2nd sequence (II) channel 2,3 are selected.
The data acquisition on (Excel) will be, for 1st
tra nsmission.
0.0 01 (1st sequ ence) (Channel 1)
nd
2 transm ission
0.0 03 (2nd sequence) (Channe
0.0 04 (2nd sequence) (Channel 3)
Send again :
0.0 01 (1st sequence) (Ch
Th en :
0.003 (2nd sequence) (Channel 2)
0.004 (2nd sequence) (Channel 3)
*Automatic data request
In the automatic mode, the sequences are
automatically sent one after the other.
89
E
el 1)
l 2)
annel 1)