Sub-Menu Channel Setup - sylvac D200S Manuel D'utilisation

4.1.2

Sub-menu Channel Setup

Measuring type: External or Internal
Measuring mode :
Direct: direct display of the value
Max: displays the maximum value
Min: displays the minimum value
Delta: displays the difference (maximum - minimum)
Mean: displays the mean value (maximum + minimum)/2
Flatness: displays the difference (maximum - minim
preceding the channel in
e. g.: the "Flatness" mo
Comment: the "Flatnes
C oncentricity: displays the difference (
C omment: after configuration of the m
"Min/Max" key to activate the function. If not, all channels will stay in
direct mode.
C hannel disable :
T he channel selected can be hidden, th value is not visible anymore but the
m easurement is always active.
C alibration :
E ach channel can be calibrated individ
R ef 0 : Reference value 0
R ef 1 : Reference value 1
M ath. function
F actor A : multiplication factor of the ch nnel.
C anal A : Selected channel(1, 2 ,...)
A measurement can be made up of se
b y an operator (+,-,*,/).
C alibration Dates
T he calibration date can be introduced
T he next calibration date can be introd
R eset :
E rase all the data of the selected chan
Configuration of the channels
Each channel can be configured with the
following parameters:
Setting :
Upper Tol. = Upper tolerance
Lower Tol.. =Lower tolerance
Nominal Value = Nominal value
Preset Value = Pre-selected value
Measurin
Increase (+) = positive (+)
Decrease (-) = negative (-)
dicating the "Flatness" mode.
de has been selected on channel 6 (no probe
is connected to th is channel). In this case, the difference of
maximum-minimu m of channels 1 to 5 will be calculated and
displayed on channel 6. The utmost maximum and the smallest
minimum of chan nels 1 to 5 are used for calculation. This
corresponds to a general "delta" of the channels 1 to 5.
s" mode must only be used on 1 channel at
the time.
maximum - minimum), identical to a "delta".
easuring mode, it is nece
e
ually. See chapte
a
veral channels, the combination can be m
.
uced.
nel.
g direction and mode
um) of all channels,
r 7.
88
E
ssary to press the
ade