Technical Specifications - sylvac D200S Manuel D'utilisation

8 Technical spec
C ase
F ront panel
R ear panel
D imensions
D egree of IP Protection
W eight
S torage temperature
O erating p temperature
T hermal stabilization
w hen Switching ON
F requency of
m easurement
D ynamic measurement
D igital output
In puts
PC Connection
Type of probe
P2
P5
P10
P25
P50
ifications
Aluminium
Plastic ABS, Front plate : Aluminium
Plastic ABS, Rear plate : Aluminium varnish
Width: 304 mm, depth: 171 mm, height: 61 mm
IP50
1.2 kg
Between –20°C and +45°C
Between +5°C and +40°C
30 minutes minimum.
P2/5/10/25/50 : 200 measures/s
= 10ms for 10 µm range, = 30ms for 100 µm range.
Signals of class (according to tolerances)
*Signals for pneumatic D110 unit on opto-copler.
1 External contact, by foot-pedal
USB/RS232 for remote commands from a PC.
2 External contacts on digital outputs
USB or RS232
Accuracy D200S + probes
Error average
1.5 µm
1.6 µm
1.6 µm
1.9 µm
3.9 µm
108
Repeatability (+/- 2
0.3 µm
0.3 µm
0.2 µm
0.2 µm
0.4 µm
E
)