Sub-Menu Foot Pedal, Switch 1 And 2 Setting - sylvac D200S Manuel D'utilisation

4.1.4 Sub -menu Foot Pedal, Switch 1 and 2 Setting
D 110 L wering o
A ctivates the downwards movement of the probes (by the unit D110).
D110 Lifting
Activates the upwards movement of the prob
D110 Toggle
Activates the upwards/downwards movement of the probes (by the unit D110).
Hold Enable
Activates the inhibition of values. The values displayed are locked; the movement of
the probes has no effect on the displayed values anymore.
Hold Disable
Deactivates the inhibition of values.
Hold Toggle
Activates / deactivates the inhibition of the values.
P ause Enable
A ctivates the "Pause" function (see also page 97)
P ause Disable
D eactivates the "Pause" function (see also page 97)
Pause Toggle
Activates / deactivates the "Pause" function (see also page 97)
Print – Seq1-8
Sends the selected sequence to Excel / Notepad. The sequences may be configured
in menu "4.1.3 Sub-menu Sequences Configuration"
Change Digital Output Setting
Two modes are possible in the configuration menu for the Digital Output:
1 = Master Tol & D110,
2 = Channel Tol,
By activating the external contact, this configuration changes from one to the other
function. See chapter 4.1.5
Single Function
Allows th e attribution of a single function to
the external contact
Combined Function
Allows the attribution of multiple functions
to the external contac
combine up to 4 functions.
No Function
No function
Print
Activates the data transfer
Preset
Activates the "Preset" value
Clear
Initializes Min/Max...
es (by the unit D110).
90
E
t. It is possible to