Sub-Menu Rs232 Setup - sylvac D200S Manuel D'utilisation

4 .1.1

Sub-menu RS232 Setup

RS 232 Setup
The Parameters of transmission are:
Baud Rate : 19200
Data Bits : 8
Parity : N (None)
Stop Bits : 2
They are automatically selected.
The Configuration RS232 or USB allows you to
select the port or the ports used. One unit = 1
port (COM...)
The end Characters of transmissions can be
configured on : TAB, ENTER, Up arrow,
Down arrow
T he function of Record Preamble Keystrokes
can be configured on :
E NTER, Up Arrow, Down Arro
Automatic data request (Scanning)
To collect the data automaticall
appendix in white, than select
measurement (for example: ever
(3000 ms)
To select a second connec
appendix in white, than sele
used.
Idem for use of a third D200S unit.
87
E
w, Left Arrow.
y, select the
t he frequency of
y three seconds
tion, click the
ct the second port