Start-Up - Ivoclar Vivadent Bluephase G4 Mode D'emploi

3. Start-Up

Check the delivery for completeness and any possible
transportation damage (see List of parts). If parts are
damaged or missing, contact your Ivoclar Vivadent
representative.
Charging base without integrated radiometer
Before you switch on the device, make sure that the
voltage mentioned on the rating plate complies with
your local power supply. Connect the power cord with
the power supply. Make sure that the power cord is
easily accessible at any time and can be easily
disconnected from the power supply.
10
Charging base with integrated radiometer
Before you switch on the device, make sure that the
voltage mentioned on the rating plate complies with
your local power supply.
Slide the connection plug of the power pack into the
socket on the underside of the charging base. Tilt it
slightly and apply slight pressure until you hear and feel
it snap into place. Place the charging base on a suitable,
flat table top.