Start-Up; Charging Base; Handpiece - Ivoclar Vivadent BluephaseN M Mode D'emploi

3. Start-up

Check the delivery for completeness and any possible
transportation damage (see Delivery Form). If parts are
damaged or missing, contact your local Ivoclar Vivadent
partner.

Charging base

Before you switch on the device, make sure that the
voltage mentioned on the rating plate of the power pack
complies with that of your local power supply.
Connect the power cord with the power pack and then
connect with the power supply. The Power On indicator
on the charging base lights up in blue.

Handpiece

Remove the handpiece from its packaging and clean the
light probe and the handpiece (see Maintenance and
Cleaning section). The light probe can be removed and
reattached by slightly rotating it.
After that, mount the anti-glare protection on the light
probe.
7